Choose an angle grinder by the work its manual permits, then by disc size, mounting, guard and handling. For metal grinding, Bosch WS 650 and DEWALT DW801 are two corded options to shortlist. If cutting is your main job, do not choose the DW801 on the assumption that any 100 mm cutting disc makes it a cut-off tool: the reviewed India manual does not recommend cutting-off. [1] [3]
Start with the job
- Removing metal or dressing a rough edge: shortlist a grinder with a manufacturer-approved grinding wheel for the workpiece. Compare the complete, correctly guarded setup rather than watts alone. [3]
- Cutting metal: Bosch lists metal cutting among WS 650 applications. Before buying it for this job, confirm the exact cutting wheel, mounting parts and cutting guard in the supplied WS 650 instructions or with Bosch. Do not borrow a guard recommendation from a different Bosch model. [1]
- Sanding, wire brushing or polishing: do not assume that every grinder supports these jobs. The DW801 India manual does not recommend these operations. Choose a tool with explicit instructions for the operation you need. [3]
- Cutting wood: choose a saw intended for the cut. Do not fit a toothed saw blade or saw-chain woodcarving blade to the DW801; its manual warns of kickback and loss of control. [3]
Two listed tools, with different buying checks
Bosch STANDARD LINE WS 650
Bosch India specifies 650 W input, a 100 mm disc diameter, M10 spindle and 12,000 rpm no-load speed. It is corded and does not use X-LOCK. Bosch lists metal grinding, deburring, finishing and cutting, plus concrete grinding, as applications. These descriptions do not identify a complete accessory setup for your particular job. Confirm the exact manual, guard, wheel and dust-control requirements before ordering accessories. [1]
DEWALT DW801
The official India-market DW801-IN01 page identifies an 850 W, 4-inch grinder with a toggle switch. The reviewed DW801-IN type-16 manual specifies a 100 mm type-27 grinding wheel, 6 mm grinding-wheel thickness and M10 spindle. Match the actual tool type to its manual before selecting a wheel. This guide treats it as a grinding option, not as a general-purpose cutter. [2] [3]
View the DEWALT DW801 listing. Already choosing among DEWALT models? Use the DW801, DW802 and DW810 comparison.
Before adding a disc to your order
For the DW801, the manual requires all of these checks. For another grinder, use its own corresponding instructions; matching diameter alone is insufficient. [3]
- Operation: the tool and wheel must both permit the job.
- Material: choose an accessory specifically recommended for the workpiece.
- Dimensions and mounting: match diameter, thickness and wheel type. A threaded accessory must match the spindle; a flange-mounted wheel must match the locating flange. M10 is not a statement of the wheel's centre-hole diameter.
- Speed: the accessory's rated speed must meet or exceed the maximum speed marked on the tool. Check the actual label and matching manual, not just a shop's specification table.
- Guard and hardware: use the correct guard and undamaged, specified mounting parts. Stop if the tool, manual or accessory marking does not agree.
For accessory types and material choices, continue to Cutting Discs, Grinding Discs & Wire Brushes and Machine Accessories.
Buyer questions
Is an 850 W grinder automatically better than a 650 W grinder?
No. Input wattage alone does not establish which complete setup suits your job. First confirm the permitted operation, then compare handling, controls, compatible accessories and the total price of the equipment you need. The WS 650 and DW801 also have different application evidence, so they should not be treated as interchangeable. [1] [3]
Can I buy a DW801 for cutting metal or tiles?
Do not buy it on that basis using the reviewed type-16 India instructions: cutting-off is not recommended. Product photos or a disc that physically fits do not override the intended-use instructions. Choose a tool and setup explicitly permitted for the material and cutting operation. [3]
Does a 100 mm disc fit both grinders?
Not necessarily. Diameter is only one check. Operation, thickness, wheel type, mounting, guard and speed rating must also match the particular tool. The shared size does not establish interchangeability. [1] [3]
Can I fit a larger wheel for more reach?
No. Do not exceed the tool's diameter or thickness limits, alter the guard, or fit a worn-down wheel from a larger tool. Incorrect wheels may be inadequately guarded or unsuitable for the smaller tool's speed. [3]
Can a cutting disc be used to grind a surface?
Do not side-grind with a cut-off wheel. Use the correct grinding wheel on a tool that permits it. This warning does not authorise cutting with the DW801. [3]
Is a lockable switch a safety brake?
Do not assume so. Bosch lists a lockable switch for WS 650, but that specification is not a claim that it has a brake or restart protection. Check the exact tool's controls and instructions before use. [1]
What should I budget for besides the grinder?
Confirm the required handle, guard, mounting hardware and suitable wheel, plus the protection and dust controls required by the job. Check the exact listing's included-items information rather than assuming a product photo shows everything supplied. Do not operate with missing required equipment.
Can I change the DW801's carbon brushes myself?
The reviewed India manual says the carbon brushes are not user-serviceable and directs servicing to an authorised DEWALT repair agent. Accessible brushes in product-page wording do not change that instruction. [2] [3]
Before the first use
Read the supplied manual in full. For the DW801, unplug before adjustments or accessory changes; use its required guard and handle, secure the workpiece, inspect the wheel, keep the cord and bystanders clear, and wear the eye, face, hearing and respiratory protection required for the work. Keep sparks away from flammable materials and do not use liquid-cooled accessories. Follow the manual's installation and pre-use test procedure, and let the wheel stop completely before putting the tool down. These checks are not a replacement for the exact tool's instructions. [3]
Sources
Manufacturer information checked 25 October 2026. Sources describe particular models and types; they do not establish compatibility for every grinder.
- Bosch India: STANDARD LINE WS 650, order 0 615 V00 00L — technical data and applications.
- DEWALT: DW801-IN01, available in India — model identity and controls.
- DEWALT India DW801/DW803/DW810 type-16 instructions, NB085754 (07/25) — DW801-IN technical data, permitted operations, accessory checks and servicing.