Accessory guide

Compatibility Finder

This finder currently covers selected drill-bit examples for Bosch GSB 600, order 06011A03F0.

These examples compare published dimensions, holder requirements, material and mode. They are not a physical fit test or an explicit manufacturer pairing approval.

Three checked dimensional examples. Choose either starting point below.

Confirm the tool label and exact accessory code before buying. Listing availability does not verify the physical item supplied.

Accessories for your tool

Start with the exact tool on its label, then read the material and drilling-mode scope beside each example.

Bosch GSB 600

Order 06011A03F0 · Type 3601AA03F0 · Standard keyed chuck. Replacement chucks and adapters are outside these examples. [1] [2]

View product

The listing identifies the model; the supplied order code and pack still need checking.

Published dimensions and holder requirements match

Bosch PointTeQ HSS, 6 mm

Accessory code: 2608577228

Manufacturer pack: ten 6 mm bits of one size. This is not a multi-size set.

Material: steel

Mode: rotary drilling; hammer action off

Shank and holder: 6 mm cylindrical shank, within the documented 1.5–13 mm range of the standard keyed chuck.

Cutting diameter: 6 mm, within the documented 10 mm steel-drilling capacity.

Published requirements [1] [2] [3]

Published dimensions and holder requirements match

Bosch PRO Wood brad-point, 6 mm

Accessory code: 2608577709

Manufacturer pack: 1 piece.

Material: hardwood / softwood

Mode: rotary drilling; hammer action off

Shank and holder: 6 mm cylindrical shank, within the documented 1.5–13 mm range of the standard keyed chuck.

Cutting diameter: 6 mm, within the documented 25 mm wood-drilling capacity.

Published requirements [1] [2] [4]

Published dimensions and holder requirements match

Bosch PRO Wood brad-point, 8 mm

Accessory code: 2608577711

Manufacturer pack: 1 piece.

Material: hardwood / softwood

Mode: rotary drilling; hammer action off

Shank and holder: 8 mm cylindrical shank, within the documented 1.5–13 mm range of the standard keyed chuck.

Cutting diameter: 8 mm, within the documented 25 mm wood-drilling capacity.

Published requirements [1] [2] [4]

Another tool or setup?

This combination isn’t in our checked examples.

Check the exact tool and accessory instructions before choosing.

Tools for your accessory

Start with the exact accessory code. Open an example to see the tool and its documented limits.

Bosch PointTeQ HSS, 6 mm

See tool example for 2608577228

Published dimensions and holder requirements match

Bosch GSB 600

Accessory code: 2608577228

Manufacturer pack: ten 6 mm bits of one size. This is not a multi-size set.

Material: steel

Mode: rotary drilling; hammer action off

Shank and holder: 6 mm cylindrical shank, within the documented 1.5–13 mm range of the standard keyed chuck.

Cutting diameter: 6 mm, within the documented 10 mm steel-drilling capacity.

Published requirements [1] [2] [3]

Bosch PRO Wood brad-point, 6 mm

See tool example for 2608577709

Published dimensions and holder requirements match

Bosch GSB 600

Accessory code: 2608577709

Manufacturer pack: 1 piece.

Material: hardwood / softwood

Mode: rotary drilling; hammer action off

Shank and holder: 6 mm cylindrical shank, within the documented 1.5–13 mm range of the standard keyed chuck.

Cutting diameter: 6 mm, within the documented 25 mm wood-drilling capacity.

Published requirements [1] [2] [4]

Bosch PRO Wood brad-point, 8 mm

See tool example for 2608577711

Published dimensions and holder requirements match

Bosch GSB 600

Accessory code: 2608577711

Manufacturer pack: 1 piece.

Material: hardwood / softwood

Mode: rotary drilling; hammer action off

Shank and holder: 8 mm cylindrical shank, within the documented 1.5–13 mm range of the standard keyed chuck.

Cutting diameter: 8 mm, within the documented 25 mm wood-drilling capacity.

Published requirements [1] [2] [4]

Another accessory, size or set?

This combination isn’t in our checked examples.

Check the exact tool and accessory instructions before choosing.

Before you use an example

These are published-requirements comparisons. No exact-model manufacturer pairing, physical fit test, supplied-stock identity or operating-speed setting is approved here.

Follow the exact tool and accessory instructions for safe setup and use. Choose the working speed for the material and diameter; the tool’s no-load maximum is not a recommended working speed. [2]

Based on current official India pages and the manual linked by Bosch India. Sources checked 13 October 2026.

Sources
  1. Bosch India GSB 600 order 06011A03F0 (opens in a new tab)

    Technical data and tool identification: order 06011A03F0, type 3601AA03F0, chuck range 1.5–13 mm, steel capacity 10 mm and wood capacity 25 mm.

    Return to reference 1 Return to reference 2 Return to reference 3 Return to reference 4 Return to reference 5 Return to reference 6 Return to reference 7
  2. Current India-linked GSB 600 manual 1 609 92A 89B (opens in a new tab)

    Manual 1 609 92A 89B, currently linked from the India GSB 600 page. Printed pp.5–8: safety, intended use, standard keyed chuck, capacities, drilling mode and speed selection.

    Return to reference 1 Return to reference 2 Return to reference 3 Return to reference 4 Return to reference 5 Return to reference 6 Return to reference 7 Return to reference 8
  3. Bosch India PointTeQ individual bits (opens in a new tab)

    Exact 2608577228 product details: 6 mm cutting diameter and 6 mm shank, 57 mm working length, 93 mm total length, ten-piece manufacturer pack. Steel; cylindrical shank for a three-jaw chuck; rotary-drill class.

    Return to reference 1 Return to reference 2
  4. Bosch India PRO Wood Brad Point (opens in a new tab)

    Exact 2608577709 and 2608577711 product details: respective 6 mm and 8 mm cutting and shank diameters; one-piece manufacturer packs. Hardwood/softwood; cylindrical shank for a three-jaw chuck; rotary-drill class.

    Return to reference 1 Return to reference 2 Return to reference 3 Return to reference 4