BLACK+DECKER India · India buying guide

BLACK+DECKER BCD001C1-QW vs BCD003C1-QW

Choose BCD001C1-QW for occasional screwdriving and drilling in wood, metal or plastic. Consider BCD003C1-QW when you need two speed ranges and hammer action for suitable masonry jobs. Both are India-listed 18V drills. [1]; [2].

Order by the full C1-QW code and confirm the actual carton contents. BLACK+DECKER’s India pages describe a 1.5Ah battery and 400mA charger with each kit, but the selected store package still needs checking. [1]; [2].

BCD001C1-QW product image

Cordless drills

BCD001C1-QW

Single-speed 18V drill-driver for screwdriving and non-masonry drilling.

View product
BCD003C1-QW product image

Cordless drills

BCD003C1-QW

Two-speed 18V hammer drill with a stated 10 mm masonry maximum.

View product

Check included accessories on the product page; images may show items sold separately.

Choose by the job

  • Furniture assembly and occasional screws: BCD001 offers a variable-speed trigger and adjustable clutch. BCD003 also supports screwdriving; choose its extra gear range or hammer function only if you need them.
  • Wood, metal and plastic: both product pages describe these uses. BCD003 adds a lower range for controlled driving and a higher range for drilling.
  • Occasional masonry holes: BCD003 is the model with hammer action and a stated 10 mm masonry maximum. Confirm the wall material, required hole and suitable bit.
  • Dense or reinforced concrete, large repeated anchor holes or chiselling: do not assume either drill is suitable. BCD003’s hammer action does not make it an SDS rotary hammer.
  • A joint with a specified tightening torque: follow an appropriate torque-controlled fastening process. Neither maximum-torque figures nor clutch positions establish the final torque in your joint.

[1]; [2]. These tools are described for DIY use; assess demanding continuous workloads separately. [3].

Compare functions and capacities

Feature BCD001C1-QW BCD003C1-QW
Tool type Drill-driver Two-speed hammer drill
Published voltage 18V 18V
No-load speed 0–600 rpm 0–360 / 0–1400 rpm
Hammer action Choose for non-masonry drilling and screwdriving 21,000 beats/min
Chuck 10 mm, two sleeve 10 mm, two sleeve
Steel or metal maximum Steel: 10 mm Metal: 10 mm
Wood drilling Maximum 25 mm Wood drilling supported; confirm the required hole size with BLACK+DECKER
Masonry drilling Do not choose it for masonry Maximum 10 mm in masonry
Screwdriving control Variable trigger and adjustable clutch Variable speed and adjustable clutch
Manufacturer-listed kit One 18V 1.5Ah lithium-ion battery and one 400mA charger One 18V 1.5Ah lithium-ion battery and one 400mA charger

[1]; [2].

No-load speed is rotation without a working load; it does not predict completion time. Beats per minute describes hammer repetition, not impact energy. The BCD003 page mentions concrete as an application but labels its 10 mm capacity “masonry”; do not treat that as a separate concrete rating or a reinforced-concrete promise. Check actual package contents before ordering.

Understand the ratings

Voltage: both exact India pages say 18V. That label alone does not prove compatibility with another battery or charger. Confirm the exact approved pack and charger codes rather than relying on 18V or 20V family wording. [1]; [2].

Clutch and torque: the adjustable clutch helps control screwdriving, but its positions are not certified Nm settings. A maximum-torque specification does not guarantee damage-free screws or a particular final joint torque. [1]; [2].

Battery and charging: Ah is battery capacity; mA is charger current. These figures alone do not establish runtime or a universal charging time. Use the instructions for the exact supplied battery and charger.

Chuck and hole size: the chuck specification and material-dependent drilling capacities are different. For example, BCD001 lists a 10 mm chuck and a 25 mm wood maximum. Check bit-shank fit and intended use separately. [1].

BCD001C1-QW questions and guidance

Is BCD001C1-QW a hammer drill?

Its India page describes a drill-driver for timber, metal and plastic. Do not buy it for masonry on the assumption that fitting a masonry bit adds hammer action. [1].

Is its speed fixed at 600 rpm?

No. The listed no-load range is 0–600 rpm with a variable-speed switch. It is a one-speed model; the upper value is not a promise of speed under load. [1].

What comes with the drill?

BLACK+DECKER lists one 18V 1.5Ah battery and one 400mA charger. Confirm the charger in the actual store package before ordering: the selected listing’s component description names the tool and battery. Do not assume a second battery, bit assortment or case. [1].

Will the clutch prevent screw-head damage?

There is no damage-free guarantee. Correct bit fit, alignment, screw and joint all matter. Use the specified fastening process where final tightening torque is important.

Do: choose around its non-masonry applications, confirm the C1-QW package and charger, and read the supplied instructions before setup and charging. Don’t: infer hammer action, SDS fit or calibrated torque control from its voltage or chuck size.

BCD003C1-QW questions and guidance

What does BCD003 add?

Two speed ranges and explicit hammer-drilling support. The manufacturer lists 21,000 beats/min and a 10 mm masonry maximum. [2].

Can it drill concrete?

The India page describes hammer action for masonry and concrete. Its capacity table says 10 mm in masonry. Confirm suitability for the actual wall and hole; do not assume reinforced-concrete performance, repeated large anchor holes or chiselling. [2].

How should I choose clutch or operating modes?

Use the instructions and collar markings on your exact C1-QW drill. Confirm the controls before use rather than borrowing a procedure from a similarly named regional version.

What wood-hole size can I drill?

The exact India page supports wood drilling but does not give a numerical wood capacity. Confirm the required hole size and bit with BLACK+DECKER before buying. [2].

Does the kit include bits or a bag?

The India C1-QW page lists a 1.5Ah battery and a 400mA charger, states that accessories are not included and identifies carton packaging. Do not assume bits, a case or a bag; confirm the actual supplied package. [2].

Do: choose it when you need its two speed ranges or hammer action, check the actual masonry material and hole size, and follow the exact QW instructions. Don’t: treat it as an impact driver or rotary hammer, assume continuous-running controls, or predict runtime from rpm.

Common questions

Which is better for home furniture?

BCD001 is the simpler choice when ordinary screwdriving is the main task and you do not need two gears or hammer action. Both models support screwdriving. Check access and the correct bit for the furniture fittings. [1]; [2].

Can I share any 18V or 20V battery and charger?

No. Check the exact approved battery and charger codes for the C1-QW tool. Same brand, voltage wording or slide shape does not establish compatibility.

Why are there two BCD001 product links?

They are separate store listings for BCD001C1-QW. They do not represent two different drill models. Confirm the selected package, current availability and final price on the product page.

Are they intended for all-day industrial work?

The India policy positions BLACK+DECKER power tools for DIY use. Choose a tool and service arrangement suited to a demanding continuous workload rather than assuming the cordless or hammer label establishes endurance. [3].

Before you buy and use the drill

  • Confirm the full C1-QW kit code, tool label and carton contents, including the charger.
  • Obtain the instructions that match the actual tool. Use them for bit fitting, operating controls, personal protection, charging and maintenance.
  • Check the supplied battery and charger codes, mains input and plug before use. Do not substitute a pack or charger based only on capacity, current or voltage.
  • Check current warranty and service conditions, keep the invoice and confirm where service is available. [3].

View the exact drill listings

Buy Now and Add to Cart both open the product page; they do not add an item to your cart automatically. Check current price, availability and the supplied package there. The enquiry link opens the other BCD001C1-QW product record.

Specification-based comparison using manufacturer information. Reviewed 11 October 2026. Follow the operating instructions supplied with your exact tool.

Sources
  1. BCD001 India features and specifications (opens in a new tab)
  2. BCD003 India features and specifications (opens in a new tab)
  3. BLACK+DECKER India warranty and use conditions (opens in a new tab)